Contact a dealer in your area. Close and repoen drivers door.press lock and unlock on the vechicle lock control switch at 1 second intervals 5 times.
The remote will start and stop the vehicle, i haven't tested the panic.
Astroflex remote start not working. While engine is running (key in ignition switch), apply the brakes and hold the pedal down. You may need to reset the system. Theres also a third thing stuck onto the module but it only says astroflex.
If you need help or have a question about an astrostart product you. If the gearshift lever can be accessed without opening a door (i.e. Push any button the first remote to be programmed.
If the gearshift lever can be accessed without opening a door (i.e. Convertibles) or if opening any one door does not break the safety sequence, we strongly recommend adding a motion detector (microwave) to prevent a start if any activity is detected near the gearshift lever. If you do not have the users' manual for your product, you.
Insert key into the ignition switch,then remove it.press lock and unlock on the vechicle door lock control switch at 1 second intervals 5 times. Sequence activated by the parking brake. The control center doesnt respond to any presses either.
One is for the year 2000, covers the astrostart (astroflex) series 500,1100,2100 & 4100. Push any button the first remote to be programmed. I work in a starter repair/rebuild shop, and ironically, we don't do remotes.
First leave driver door open all other doors closed,key removed from the ignition switch. The easiest and simplest way of. It's connected to a gmdl 4 version 01.01.
Astroflex remote start wiring diagram. I disconnected the battery once, now my 2 way automate remote start works but i only from max 20ft range, before i could start from the middle of the mall. Move gearshift lever to neutral.
I have a model 1100 astroflex (they renamed to astrostart now) remote start. My problem started 2 years ago. This is a video about that and how to fix it.
One is for the year 2000, covers the astrostart (astroflex) series 500,1100,2100 & 4100. Certain directed remote start systems are even designed to work with automatic transmission vehicles employing diesel engines, from luxury models to heavy equipment and long haul trucks. Newer remote starters rarely need resetting, but they run through juice like minute maid in the mojave.
My new remote which was recommended to me by a dealship is a 2204 and i have synched it up with the brain under the following procedure. The remote will not unlock or lock the doors. Flip switch 8 on brain , press button on remote,pressing the brake.
With astrostart's new ds4 technology, smartphone vehicle control capability is built right into your astrostart remote start system. When the remote start is in start valet mode, it will respond with an error code 20 and will not remote start. See page 10 for programming options.
Now, not unless im standing in front of it! Zthat part seems to have gone ok because my buttons are working and the vehicle is responding. It worked fine for a while, then the van refused to start on the key, but starts fine with the remote.
Yes, directed security systems are designed to universally interface with any vehicle that employs a 12 volt electrical system, including cars, trucks, boats, motorcycles, motorhomes, suvs, etc. Astrostart won't start the car. Astroflex remote start not working.
It starts fine from 20ft with both remotes.