As a safety precaution, the washer won’t start if the door isn’t properly shut and latched. The lid switch may be responsible for your maytag washer not starting and needs to be replaced.
If the outlet is working, plug the power cord securely into the outlet.
What to do when maytag washer won't start. Maytag washer la9700 won't start or doesn't start won't start is the most common symptom for maytag la9700. If your maytag washing machine isn’t starting, verify that the power cord is connected to a live outlet. You may need to press and hold the start button for up to 3 seconds to engage the cycle.
Check the continuity with a multimeter. Next, check for a tripped circuit breaker. The washer won’t start if the lid switch is defective.
It may happen that, one day, the start button on your maytag washing machine won’t work. If there's no power running through the. Make sure the machine is tightly plugged in.
You may need to press and hold the start button for up to 3 seconds to engage the cycle. If your maytag washer will not turn on, start by checking the incoming power supply to the appliance. Ensure that there are no blown fuses or tripped circuit breakers.
The lid must be completely closed and latched for the washer to operate. Reset the breaker and try to start the washer. Is the lid completely latched?
If neither is at fault, you may have a damaged power cord. Maytag washer la9700 won't start or doesn't start won't start is the most common symptom for maytag la9700. To test if it’s working correctly, close the washer lid;
If your maytag washer fails to start, the lid switch might be broken. Check the door for trapped clothing that may prevent it from closing completely. Use a flathead screwdriver to remove the plastic tab from your maytag washer’s door hinge.
What do you do when your maytag washer won’t start? Do not use an extension cord or adapter. Then, clean any corroded contact pads that are exposed underneath the user interface.
When your maytag washer turns on but won’t start there may be a problem with the door closure. Do not use an extension cord or adapter. Always close the door firmly and allow 10 seconds for the latch to engage.